CSF-65-160-2UH-LW Harmonic Drive / Speed Reducer / Strain Wave Gearing

Basic Static Radial Load Rating Co:190000 N; Fillet Radius rb:1.00 mm; Grease Speed Rating n1:3300 rpm; d:60.000 mm; D:150.0000 mm; B:70.00 mm; Fillet Radius ra:2.00 mm; Oil Speed Rating n2:4200 rpm; Basic Dynamic Radial Load Rating C:203000 N;

B:35 mm; Permissible sliding velocity v min.:0 m/s; D:80 mm; Tolerance housing:H7; B1:8 mm; Specific dynamic load factor K:25 N/mm²; Specific static load factor K0:45 N/mm²; D1:90 mm; Permissible sliding velocity v max.:0.5 m/s; Coefficient of friction µ min.:0.08;

Fillet Radius rb:1.00 mm; Basic Dynamic Radial Load Rating C:104000 N; Oil Speed Rating n2:5100 rpm; Fillet Radius ra:1.50 mm; Basic Static Radial Load Rating Co:110000 N; B:46.00 mm; D:120.0000 mm; d:65.000 mm; Grease Speed Rating n1:3900 rpm;

B:33.00 mm; Basic Dynamic Radial Load Rating C:101000 N; Grease Speed Rating n1:4300 rpm; Basic Static Radial Load Rating Co:80000 N; D:140.0000 mm; Oil Speed Rating n2:5600 rpm; Fillet Radius ra:2.00 mm; d:65.000 mm;

Pa:17.3 kN; P90°:77 kN; da:82.55 mm; Bearing limiting speed:3600 r/min; P120°:48.9 kN; End plug (suffix Y):EPR 11; PG:1/8 NPT; R1:73.025 mm; J min.:304.8 mm; Ca:73.787 mm;

Threads per inch:12; Mass adapter sleeve assembly:1.55 kg; B:16.129 mm; d3 max.:112.039 mm; Lock washer:W 17; G:84.836 mm; d:85 mm; Hydraulic nut:HMVC 17E; d1:74.612 mm; Lock nut:AN 17;

Static (Cor):24.000 kN; D:85 mm; Grease:0.370 kN; d:45 mm; with cylindrical bore:8 900 min-1; rs Dynamic (Cr):1.1 mm; with tapered bore:2209  ; Pu:8.100 kN; B1:mm; B:23 mm;

Calculation factor e:0.4; Basic static load rating C0:320 kN; a:32.421 mm; r3,4 min.:3.3 mm; d:82.55 mm; db min.:96.5 mm; r1,2 min.:3.5 mm; Da min.:125 mm; T:41.275 mm; D:146.05 mm;

Axial load factor Y:0.4; ra max.:4 mm; db min.:314 mm; ra max.:4 mm; Mass bearing:137 kg; Limiting value e:0.3; s max.:1.5 mm; da max.:294 mm; r1,2 min.:5 mm; Reference speed:1200 r/min;

Operating clearance factor k2:0.094; Fatigue load limit Pu:1800 kN; r1,2 min.:9.5 mm; da max.:883 mm; Da min.:1025 mm; d:750 mm; Da max.:1180 mm; Misalignment factor k1:0; s1 max.:33 mm; ra max.:8 mm;

B2:11 mm; d1 ≈:94.4 mm; Mass angle ring:0.16 kg; B1:7 mm; r3,4 min.:1.5 mm; d:75 mm;

P90°:105 kN; R2:30.163 mm; J max.:333.375 mm; P150°:58.7 kN; Stabilizing ring:SR-20-17; P120°:64.9 kN; Ca:55.804 mm; Da:180 mm; S:4.763 mm; P60°:175 kN;

Static (Cor):0.722 kN; Dynamic (Cr):1.550 kN; da:9.8 min; Oil:42 000 min-1; Weight:0.003 kg; D:16 mm; B:4 mm; Da:14 max; Pu:0.033 kN; Bearing designation:618/8TNH  ;

D:1460 mm; B1:335 mm; B:500 mm; Weight:2470  ; Dynamic (Cr):11730 kN; Pu:2005.900 kg; Static (Cor):35175  ; Bearing designation:PLC 512-68  ; d:1060 mm;

Da max.:176 mm; das:111 mm; D:190 mm; d:90 mm; Reference speed:1400 r/min; D1 ≈:152 mm; Mass bearing:8.75 kg; Calculation factor e:0.3; Basic dynamic load rating C:550 kN; Basic static load rating C0:680 kN;