- BEARING DRIVESHAFT,INC.
- Cylindrical Roller Bearing Harmonic Reducer Bearing High precision bearing
English
Home>Products>Cylindrical Roller Bearing>NJ209E Bearing 45x85x19mm
NJ209E Bearing 45x85x19mm
category
Cylindrical Roller Bearing
NJ209E Bearing 45x85x19mm SPECIFICATIONS
170 Million used BEARING DRIVESHAFT,INC. NJ209E Bearing 45x85x19mm instantly searchable. Shop our large selection of parts based on brand, price, description, and location. 1.909 Inch | 48.489 Length Thru Bore Order the Cylindrical Roller Bearing with stock ...
CR6697XP
- 1.909 Inch | 48.489
- 41,504 mm
- 48,489 mm
- G1104206KRRBAS2/V
- 2.76
- 0 Inch | 0Millimeter
- 1.25
- 1/8 NPT
-
BEARING DRIVESHAFT,INC.2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
NJ209E Bearing 45x85x19mmTechnical information
- 1.909 Inch | 48.489
- 41,504 mm
- 48,489 mm
- G1104206KRRBAS2/V
- 2.76
- 0 Inch | 0Millimeter
- 1.25
- 1/8 NPT
- 1.25 Inch | 31.75 Mi
- Ball Bearing
CR6697XP NJ209E Bearing 45x85x19mmCross reference
NJ209E Bearing 45x85x19mm Size Chart (mm/inches) | |
|---|---|
| Engineering Group | Mounted Bearing |
| Bearing Number | 22222 |
| Shaft Size | 3-15/16 in |
| Shaft Size Type | Imperial |
| Full Timken Part Number | QVVPN22V315SB |
| Locking Style | Double V-Lock |
| Weight | 84 lb |
| Housing Style | Two-Bolt Pillow Block |
| UPC Code | 0883450080095 |
| Dimension A | 4.92 in |
| Dimension B | 9.47 in |
| Dimension C | 5.5 in |
| Dimension D Max | 14.50 in |
| Dimension D Min | 12.50 in |
| Dimension F | 16.00 in |
| Dimension G | 3.960 in |
| Dimension H | 2.00 in |
| Dimension J (Bolt Size) | 0.875 in |
| Dimension L | 4.55 in |
| Dimension RVV | 0.59 in |
| Dimension SVV | 5.13 in |
| C - Dynamic Load (Basic) | 125000 lb |
| C0 - Static Load | 147000 lb |
| e - Geometry Factor | 0.25 |
| Y1 - Geometry Factor | 2.73 |
| Y2 - Geometry Factor | 4.06 |
| Oil Lubrication - M/N Seal | 900 rpm |
| Oil Lubrication - T Seal | 1700 rpm |
| Oil Lubrication - B/C/O Seal | 600 rpm |
| Grease Lubrication - M/N Seal | 900 rpm |
| Grease Lubrication - T Seal | 1200 rpm |
| Grease Lubrication - B/C/O Seal | 600 rpm |
| Float | 0.083 in |
| Shaft Tolerance | 0.0030 in |
| Eng Internal Radial Clearance - Min | 0.0053 |
| Eng Internal Radial Clearance - Max | 0.0067 |
| Pre Install Clearance Min | 0.0053 in |
| Pre Install Clearance Max | 0.0067 in |
Contact Us
- BEARING DRIVESHAFT,INC.
- Address8251 South International Drive, Columbus, IN 47201,U.S.A.
- Phone(Working Time)342-6598
- Fax
timken 778 08 bearing
NU214 Bearing 70x125x24mm
NU214ETN1 Bearing 70x125x24mm
NUP213M Bearing 65x120x23mm
NJ213M Bearing 65x120x23mm